Cipta Rupa Pertama

Product Groups

Product Groups

View By Manufacturer :


The impregnation coating process, also called saturation coating, is used to coat porous substrates that have a substrate structure consisting of pores that penetrate the entire substrate. This process coats the internal web structure and fills the pores with a variety of thermoset polymeric resins that reinforce the substrate. The pores can be filled with no surface coating or they can be filled and have a surface coating. The resulting modified substrate is solid, has a surface with different characteristics than the uncoated substrate. to keep out chlorides is the most common reason for applying these coatings.

For FREE Technical Help Call Us On :

PT. Cipta Rupa Pertama

+62 22 9273 0666

PT. Cipta Rupa Pertama

+62 22 9192 8882

PT. Cipta Rupa Pertama

+62 21 9087 7195


Estotec Zincrich

Estotect SWR is a single component penetrating silane-siloxane Estotect Zincrich is supplied as a single component grey coloured liquid based on metallic zinc and epoxy resins ...

Estotect CT 450

Estotect CT 450 is a two-part pitch extended epoxy coating, which is able to provide a protection coating to concrete and metal structures against corrosion from aggressive environments. It is suitable for tanks above or under ground conditions, such as pipe linings. It is highly recommended for sewage works, effluent plants ...

Estotect E 230

Estotect E 230 is a solvent less epoxy coating and lining system for concrete and steel. It is a two pack, solvent free epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, tough and resistant finish. It is ...

Estotect E250

Estotect E250 is a high gloss non-toxic coating based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-pack material in pre-weighed quantities ready for on site mixing and use. The material can be applied directly to damp or wet prepared concrete or metal surfaces and cures ...

Estotect MMA

The Estotect MMA system comprises of a silane-siloxane primer and a single component pigmented coating. Estotect MMA Primer is a clear liquid silane-siloxamne dissolved in a penetrating organic carrier. The primer is chemically-bound hydrophobic barrier. Estotect MMA is a methyacrylate, solvent based protective coating, with outstanding resistance to aggressive elements, UV ...

Estotect SWR

Estotect SWR is a single component penetrating silane-siloxane system which penetrates into porous substrates and then reacts to produce a bonded hydrophobic lining to the pores. Although allowing passage of water vapour from the substrates it significantly reduces the absorption of water and water borne salts. Estotect SWR does not discolour ...

Preco EAC-S

EAC-S is a chemical, which temporarily halts the set of the surface concrete on which it is applied. Controlled penetration allows the concrete underneath to harden normally. The next day, the surface concrete is brushed or washed away, leaving the aggregates exposed ...

Reebol chemical

Reebol chemical mould release agent is a specially formulated blend of mineral oils and selected additives. It is supplied as a low viscosity, pale straw coloured liquid. On the mould, Reebol provides a chemical release action that is superior to that provided by normal oil based release agents (Concrete Society ...

Reebol Emulsion

Reebol Emulsion chemical mould release agent is a specially concentrated blend of mineral oils and selected additives. It is supplied as a low viscosity, pale straw coloured liquid ready for dilution with water to application strength. The concentrated form reduces cost in use to a level comparable with that for ...

Displaying 11–19 of 19    1 2