Fosroc Colpor 200PF is a cold applied, two part sealant designed polyurethane for joints in concrete paved areas. The capability of accommodating repeated and pronounced cyclic movements is retained by Colpor 200PF throughout extremes of climatic temperatures. Colpor 200PF is resistant to fuel, oil and hydraulic fluid spillage, will not harden ...

Designed to penetrate and strengthen concrete surfaces. CRP® Floor LH liquid floor hardener is used for surface hardening of new and old concrete to prevent dust generation and to reduce wear. This is particularly recommended in areas where stain resistance is the main criteria. Typical areas of application include parking facilities, ...

Expoband One is a high performance joint sealing membrane with excellent  weather resistance properties. The system is based on flexible polymers and epoxy resin adhesive. When fixed to a joint, it allows considerable movement whilst maintaining a high quality seal. ...

Expoband Plus comprises a nominal 2mm thick, butyl rubber sheet laminate, with a fully vulcanised layer coloured black, and for maximum adhesion efficiency, a thin unvulcanised layer coloured red.   ...

Nitoseal  118 is a one part, gun applied, moisture activated polyurethane sealant. After application a skin forms rapidly leaving the body of the sealant to cure more gradually, the rate being dependent upon temperature, humidity and dimensions of seal. During the curing period, one part polyurethane sealants will accept limited movement ...

Plastijoint is a bitumen based joint sealing compound which, when heated, is suitable for hand application. Joint size: Plastijoint may be applied to joints between 20 and 40 mm wide. In most cases it is advisable tp form a sealing slot approximately square in cross-section. Packaging: Tins: 5 litre ...

Plastiseal  is a flexible rubber bitumen joint sealant with excellent slump resistance. Plastiseal sets to form a firm seal after application, developing a non tacky surface within 1 or 2 days depending upon the conditions of exposure and ventilation. For large projects, such as sealing joints in irrigation canals, Plastiseal ...

Plastic sealants are hot poured, horizontal joint sealing compouds, black in colours. Plastic A2: Complies with BS 2499:1973(type A2) a low extension grade for sealing joints in concrete pavements, reservoirs, etc, where joints apacings are not more than 12m. Plastic A2 also complies with the requirements of the UK Water Research ...

Masters of concrete technologyRamset’s expertise in concrete technology includes systems for chemical and mechanical anchoring, drilling, diamond coring, construction chemicals, as well as direct fixing into concrete and steel. Our areas of speciality include:• Cracked and non-cracked concrete anchoring systems.• Anchoring systems tested to and compliant with Australian and International ...

Secomastic compound is a general purpose, oil based joint sealant possessing excellent adhesion and durability. The body of the sealant remains flexible under a paintable skin which forms within 24 to 48 hours dependent on weather conditions. Secomastic maintains a weathertight seal whilst accommodating the limited movements associated with the recommended applications. ...