An anti-graffiti coating is a coating that prevents graffiti paint from sticking to surfaces. Cleaning graffiti off buildings costs millions of pounds annually. Many cities have started anti-graffiti programs but vandalism is still a problem. The coatings developed can be the paint itself, or a clear coat added on top of existing paint or building facades. Depending on the substrate and the severity of graffiti, different coatings give different benefits and disadvantages.There are two common types of paint used today. The first is water-based paints such as latex and acrylic paint, and the second is oil-based paints. The paint of choice will depend on the substrate to be painted upon and the desired end result. All paints have the same basic structure.
PT. Cipta Rupa Pertama
+62 22 9273 0666
PT. Cipta Rupa Pertama
+62 22 9192 8882
PT. Cipta Rupa Pertama
+62 21 9087 7195
1. Nitocote ET402 is based on solvent-free epoxy resins, modified with coal tar. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. Nitocote ET402 is applied as a two coat application. It is generally applied at a wet film thickness of 200 ...
1. Nitocote EN901 is a solvent free, highly crosslinked, highbuild epoxy-novolac-based coating. Nitocote EN901 is a two-part material and can be applied by brush, roller or airless spray. Nitocote EN901 is grey in colour. It is formulated to be applied in one or two coats to achieve a minimum total-dry-film ...
1. Nitocote EP403 is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, tough and resistant finish. It is available in grey. ...
1. Nitocote EP405 is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, hygienic and tough finish which is duitable for contact with potable water and foodstuffs. It is available in blue ...
1. Nitocote EP410 is a two component, solvent free, high build epoxy formulated to provide a thixotropic coating suitable and application to vertical surfaces. The film is opaque and pigments are added to ensure that complete mixing is achieved, indicated by a uniform green colour. ...
1. Nitocote ET550 is a thixotropic, tar extended, two pack epoxy formulation, containng inert, reinforcing fillers and a special blend of solvents. It is supplied in pre-measured quantities ready for site mixing and use. ...
1. Nitocote PE135 complies with the concrete curing requirements of ASTM C309, when applied at the rate of 5m2 per litre. ...
1. A low viscosity silane-siloxane system which penetrates deeply into porous substrates and then reacts to produce a bonded hydrophobia lining to the pores. This treatment significantly reduces absorption of water and water borne salts, but still permits passage of water vapour. The treatment does not produce any discolouratin of ...
Fosroc Nukote AL is a two part, 100% solids, flexible, aliphatic spray polyurea coating. It displays excellent chemical resistance, thermal stability and UV resistance, thereby providing 100% colour stability. Fosroc Nukote AL is available in various colour upon request. ...
Fosroc Nukote BGII is a two part, flexible, pure polyurea coating. It displays excellent chemical resistance, thermal stability and UV resistance, thereby providing 100% colour stability. Fosroc Nukote BGII is available in Grey colour. Custom colours are available upon request. ...