Cipta Rupa Pertama

Grup Produk

Grup Produk

View berdasarkan manufaktur :

             

The life of a load bearing structure can be demanding. Over time it may need to be strengthened. This could be for new EU legislation on a bridge perhaps or because the structure is breaking down. The normal practice is for carbon fibre plates placed along the length of the beam. An Aramid wrap can also be used for columns. Steel plate bonding is sometimes an option. These are all adhered using an epoxy resin.

Untuk Bantuan Teknis GRATIS Hubungi Kami Di :

PT. Cipta Rupa Pertama

+62 22 9273 0666

PT. Cipta Rupa Pertama

+62 22 9192 8882

PT. Cipta Rupa Pertama

+62 21 9087 7195

Result

CRP® Floor LH

Designed to penetrate and strengthen concrete surfaces. CRP® Floor LH liquid floor hardener is used for surface hardening of new and old concrete to prevent dust generation and to reduce wear. This is particularly recommended in areas where stain resistance is the main criteria. Typical areas of application include parking facilities, ...

Nitobond EC

Adhesive compound is an epoxy resin based products with special fine fillers. The components differ in colour thus allowing visual assessment of mixing. ...

Nitobond ECP

Nitobond ECP is an epoxy resin based products with special fine fillers. The components differ in colour thus allowing visual assessment of mixing. ...

Ramset

Masters of concrete technologyRamset’s expertise in concrete technology includes systems for chemical and mechanical anchoring, drilling, diamond coring, construction chemicals, as well as direct fixing into concrete and steel. Our areas of speciality include:• Cracked and non-cracked concrete anchoring systems.• Anchoring systems tested to and compliant with Australian and International ...

Sika CarboDur Plates

Sika® CarboDur® plates are pultruded carbon fiber reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures. Sika® CarboDur® plates are bonded onto the structure as external reinforcement using Sikadur® 30 for normal - or Sikadur® 30 LP epoxy resin for elevated application temperatures (for details on the adhesive ...

Sikadur 30

Adhesive for Bonding Reinforcement. Sikadur®-30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8°C and +35°C. ...

Sikadur 330

2-part epoxy impregnation resin Sikadur®-330 is a two part, solvent free, thixotropic epoxy based impregnating resin / adhesive. ...

SikaWrap 230 C/45

Woven carbon fiber fabric for structural strengthening. SikaWrap® -230 C/45 is a unidirectional woven carbon fiber fabric for the dry application process. ...

SikaWrap 231 C

Woven carbon fiber fabric for structural strengthening. SikaWrap® -231 C is a unidirectional woven carbon fiber fabric for the dry application process. ...