Estop Admix AP is a liquid water reducing set accelerator for concrete and mortar, formulated from carefully selected active ingredient. Estop Admix AP is a cement dispering agent which acts as a catalyst and produces high early strength concrete. It reduces the water cement ratio, accelerates the initial set, increases durability, ...

Estop Admix PC50 is a high performance liquid water reducing adminure for concrete, formulated from carefully selected active ingredients based on Polycarboxylate (PCE) Estop Admix PC50 is a cement dispering agent which acts as a catalyst and produces high early strength concrete. lt reduces the water cement ratio, increases durability, reduces shrinkage ...

Cebex 031 is a red/pink liquid which contains an air entraining plasticiser hydrophobic material that impart fattiness to the mortar, which when applied to the substrate, facilitate spreading, and reduce cracking and crazing. ...

Conplast AE210 is a chloride-free admixture based on neutralised vinsol resin and is supplied as a dark brown solution. Conplast AE210 acts on the interface of the coment/aggregate particies and mixing water to produce microscopic air bubbles evenly distributed throughout the concrete. ...

Conplast RP264M2 is a dark brown liquid based on modified selected lignosulphonates. When added to concrete, Conplast RP264M3 is absorbed on to the cement, and acts as a dispersing agent by breaking down the agglomerates of cement particles. This enables the mix water to perform more efficiently. Conplast RP264M2 delays the ...

Coplas SD100 mix improver is chloride free and specially formulated for optimum performance with modern concrete block paving and masonry production equipment. It is supplied as a brown solution which instantly disperses in water. Conplast SD100 disperses the fine particles in the mix and produces a rheological flow as moulds are ...

Conplast SF1000 is a densified silica fume admixture formulated to produce high quality concrete. ...

Conplast SP2000GL is a liquid superplasticiser based on the sodium salt of a high molecular weight naphthalene Sulphonic Acid Formaldehyde Condensate it does not contain any chloride or nitrate. ...

Conplast SP337 is based on a blend of specially selected organic polymers and is supplied as a brown liquid which instantly disperses in water.   When added to the concrete mix Coplast SP337 causes the cement particles, which normally tend to agglomerate, to disperse and hence expose a larger surface area to ...

Coplast SP430D is a synthetic plastidser derived from sulphonates naphthalene. Supplied as a brown liquid and it is istantly dispersible in water. Conplast SP430D will, depend on dosage level and mix design, provide flowing concrete, high strength concrete, accelerated early age strength development and waterproof concrete. ...